Product ID:X-40 FOAM PART B, RT-5080-B
MSDS Date:03/08/1988
FSC:8030
NIIN:00N027857
Kit Part:Y
MSDS Number: BMVGG

RESIN TECHNOLOGY CO

2270 CASTLE HARBOR PLACE
ONTARIO, CA 91761
US

Emergency Phone: 714-947-7224

Info Phone: 714-947-7224

Cage: RTECH

RESIN TECHNOLOGY CO

ONTARIO, CA 91761 US

Telephone: 714-947-7224

Cage: RTECH

POLYETHER POLYOL

Fraction By Weight: 25-35%

POLYESTER POLYOL

Fraction By Weight: 10-20%

FLAME RETARDANT MATERIAL; (PHOSPHATE FLAME RETARDANT)

Fraction By Weight: 5-10%

AMINE CATALYSTS; (AMINE BASED CATALYSTS)

Fraction By Weight: <01%

METHANE, TRICHLOROFLUORO-; (TRICHLOROFLUOROMETHANE)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: 25-30%

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY BE IRRITATING TO LUNGS &
RESP PASSAGES. AT HIGH CONCS FLUOROCARBON COMPONENT MAY CAUSE
DIZZINESS, DIFFICULTY IN BREATHING & POSS NARCOSIS. SKIN/EYES:
IRRIT MAY DEVELOP FOLLOWING SKIN/EYE CO NTACT. DERMATITIS MAY
DEVELOP AFTER RPTD/PRLNG CONTACT W/HUMAN SKIN. INGEST: POSSIBLE
IRRIT OF GI TRACT(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MAY OCCUR FOLLOWING INGEST. EXPOS
>TVL MAY RESULT IN TRANSIENT REVERSIBLE RESP SYSTEM & SKIN IRRIT,
DIZZ, DFCLTY IN BRTHG & UNCON. CHLOROFLUOROCARBON MATLS HAVE PRDCD
SENSIT OF THE MYOCARDIU M TO EPINEPHRINE IN LAB ANIMALS & COULDHAVE
SIMILAR EFTS IN HUMANS. ADRENOMINETICS (E.G., EPINEPHRINE) MAY
(SUPP DATA)
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY & SKIN PROBLEMS
MAY BE AGGRAVATED BY EXPOSURE TO THIS MATERIAL.

First Aid:EYES: FLUSH IMMED W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONSULT MED PERS IMMED. SKIN: FLUSH IMMED WITH WATER.
AFFECTED AREA SHOULD THEN BE WASHED WITH SOAP & WATER. INHAL:
REMOVE VICTIM TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP, PREF
MOUTH-TO-MOUTH METHOD. IF BRTHG IS LABORED, GIVE OXYGEN. CONSULT
MED PERSONNEL. INGEST: INDUCE VOMITING AND CALL MD AT ONCE.

Flash Point Method:CC
Flash Point:269F,132C
Extinguishing Media:WATER SPRAY, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE & VAPORS.
Unusual Fire/Explosion Hazard:POSS TRICHLOROFLUOROMETHANE BREAKDOWN TO
TOX GAS AT EXTREME HIGH FIRE TEMPS. THERM DECOMP PRODS MAY INCL
CHLORIDES, FLUORIDES & PHOSGENE .

Spill Release Procedures:AVOID BREATHING FUMES, USE ADEQUATE FRESH AIR
SUPPLY. SPREAD WITH ABSORBENT MATERIAL AND SHOVEL INTO SEALABLE
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN ORIGINAL CNTNRS AWAY FROM
HEAT/MOISTURE. STORE INDOORS 50F-75F. OPEN CNTNRS CAREFULLY TO
ALLOW ANY PRESS BUILDUP TO BE VENTED SAFELY.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES, HOT SURFACES. HEAT &/UV
RADIATION MAY CAUSE FORMATION OF CHLORIDES, FLUORIDES, PHOSGENE .

Respiratory Protection:NIOSH/MSHA APPROVED FRESH AIR FULL FACE MASK OR
HOOD WITH FRESH AIR SOURCE.
Ventilation:OUTDOORS: CLOSE ALL AIR INTAKE VENTS, ON AIR HANDLING EQUIP
ON BUILDINGS. INDOORS:USE LOC EXHST IF AEROSOL IF GENERATED.
Protective Gloves:CHEM RESIST PLASTIC/RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FABRIC COVERALL & RUBBER APRON.
Work Hygienic Practices:RESTRICT ACCESS OF NON-APPLICATION PERSONNEL.
Supplemental Safety and Health
EFTS OF OVEREXP: BE CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES IN
HUMANS ACUTELY OR CHRONICALLY EXPOSED TO CFC'S CHRONIC: NONE
KNOWN.

HCC:N1
Boiling Pt:B.P. Text:>82F,>27.8C
Vapor Density:5.67 @ 86F
Spec Gravity:1.2
Evaporation Rate & Reference:GREATER (BUTYL ACETATE=1)
Solubility in Water:MODERATE
Appearance and Odor:AMBER LIQUID-NEGIGIBLE ODOR; SLIGHTLY AROMATIC.

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:POSSIBLE BREAKDOWN OF
TRICHLOROFLUOROMETHANE TO TOXIC GAS. CHLORIDES, FLUORIDES &
PHOSGENE .

Waste Disposal Methods:DISPOSE OF ALL WASTES IN ACCORDANCE WITH
FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.